Σε protrek έχουμε κάτι;;;
Στάλθηκε από το Redmi Note 5 μου χρησιμοποιώντας Tapatalk
Οπως ειπα και πιο πανω, ειναι ολα θαμμενα στο manual
Αν ψαξεις λιγο στο συνοδευτικο βιβλιαρακι, θα βρεις αρκετα τετοια, καπου προς το τελος
Κατα τα αλλα αυτα βρηκα στο
WUSPathfinder/Protrek Test ModesNote: Tested on Pathfinder PAW-2000-1Press and hold the following in sequence:
ADJUST+MODE+ALTI -
Display test modePress ALTI to scroll through various screens and escape
ADJUST+MODE+COMP -
Tilt sensor test mode (shows TLT)
Time display area shows blank when not tilted, 8888 when tilted
Press ALTI or MODE to escape
Note: Tested on ProTrek PRW-S6000Y-1Display TestTo enter test modes, press and hold Upper Left, Lower Left and Lower Right until HOD is displayed.
Press Upper Right to show the first display pattern.
Press Lower Right to show the remaining display patterns (one of which shows all display elements in use simultaneously), the module number, some unfamiliar code (004) and exit.
Tilt Sensor TestTo enter test modes, press and hold Upper Left, Lower Left and Lower Right until HOD is displayed.
Press Lower Right until TLT is displayed.
With the crystal pointing upward, press Upper Right to initiate the tilt sensor test.
Tilt the crystal toward horizontal, and 888 is displayed if the tilt sensor is working.
Press Lower Right to exit.
Solar Panel TestTo enter test modes, press and hold Upper Left, Lower Left and Lower Right until HOD is displayed.
Press Lower Right until SLR is displayed.
Press Upper Right to initiate the solar panel test.
With sufficient light, the display will be blank. With insufficient light (e.g., blocking light from hitting the solar panel in an area with moderate to dim lighting), 888 is displayed.
Press Lower Right to exit.
Time Sync Hardware TestTo enter test modes, press and hold Upper Left, Lower Left and Lower Right until HOD is displayed.
Press Lower Right until RCV is displayed.
Press Upper Right to initiate the time sync hardware test.
Press Lower Right to show various time sync values (transmitters that are supported, etc.).
Press Lower Left to exit.
Rangeman GW-9400 Test ModesBottom Left (Mode), Bottom Right (Forward) & Top Left (Adjust) -
Display test (and module version)
Press Bottom Right (Forward) to scroll through various screens and escape
Top Left (Adjust), Top Right (Reverse) & Bottom Left (Mode) -
Solar cell test/Tilt sensor test (shows SLR/TLT)
Time display area shows blank when exposed to light, 8888 when there is insufficient light
Press Bottom Left (Mode) to switch to TLT
Time display area shows blank when not tilted, 8888 when tilted
Press Bottom Right (Forward) to escape
Top Left (Adjust), Bottom Right (Forward) & Light -
Time sync hardware testShows radio-controlled transmitter countries/frequencies, etc.
Press Bottom Right (Forward) to scroll through various screens
Press Bottom Left (Mode) to escape