Guinand (D)

[george_]

6050T2

[george_]

[george_]

https://www.guinand-uhren.de/serie-40/serie-40.html

[george_]

Case diameter: 40.5 mm
Total height in the middle of the clock: 14.9 mm
Strap width: 20 mm
Measure over the horns: 44.3 mm
Dimensions between the bracelet bars: 40 mm
Weight without strap: 86 grams
Price 1849 € including steel bracelet


https://www.guinand-uhren.de/nordmeer-chrono/nordmeer-chrono.html

[george_]

Υπάρχει και αυτή η εταιρεία ήταν του Sinn

https://www.guinand-uhren.de/serie-40-en.html

[george_]

[jiorg]

Και αυτα ξεκινησαν με πολυ ελκυστικεςτιμες- χαμηλοτερες απο τα ιδιας ποιοτητας sinn, ωστοσο στην πορεια, ειχαμε τη γνωστη εξελιξη....

[george_]

Guinand - Pilot Chrono 42 Tricompax



Case diameter: 42.7 mm
Total height at center of watch: 15.35mm
Lug width: 22 mm
Measurement over the horns: 50.2 mm
Measurements between strap lugs: 45.7mm
Weight without strap: 95 grams
waterproof and pressure-resistant up to 20 bar
This chronograph is powered by the Swiss automatic movement SW510 in the top quality class with a 60-hour power reserve.
It starts at 1999 euros

[george_]

Pilot Chrono Tricompax For the Pilot Chrono 42 and Pilot Chrono 42 Tricompax, we use our large pilot's watch case – classic in proportions and thus clearly part of our pilot's chronograph series – but increased in diameter to 42.7 mm in accordance with the size of the stop counter . The protected pushers and a screw-down crown with triple sealing system and flank protection enable a reliable pressure resistance of 20 bar. The anthracite-black hard-coated stainless steel pilot's bezel can be rotated in minute increments in both directions, enabling short-term stops of up to 60 minutes without starting the chronograph. Pushers, crown and base sealed with FKM-R gaskets. /// For the Pilot Chronograph 42Chronograph we use our big pilot watch case — classical in the proportions and thus clearly associated with our Pilot Chronograph Series 40 — but increased in diameter to a diameter of 42.7 mm / 1.68 inch. The protected pushers and a screwed crown with 3-way sealing system and side protection enable a reliable pressure resistance of 20 bar. The anthracite-black hard-material coated stainless steel pilot's bezel can be rotated in minute increments in both directions, and thus enables short-term stops of up to 60 minutes without starting the chronograph. Pushers, crown and back with FKM-R sealing system

[george_]

HS106 - technical prototype We are auctioning off the prototype for a good cause. Also this year, the campaign "FAZ readers help" supports two projects - one of them with a local connection. In 2022 these will be the Frankfurt Children's Hospice Service and the German Doctors Korogocho/Kenya

[george_]

Caliber SW 500, TOP version (automatic movement bridge decorated, rotor with Classic CS Edition engraving and limitation number)
Stainless steel casing, satin finish
Glass made of flat sapphire crystal, anti-reflective inside
Screwed back with sapphire crystal
Crown screwed in and triple sealed
protected chronograph pushers
Water resistance/pressure resistance: 20 bar
FKM-R sealing system for pushers and crown
Case diameter: 40.5 mm
Total height in the middle of the watch: 14.9 mm
Lug width: 20 mm
Dimension across the horns: 44.3 mm
Dimensions between the bracelet bars: 40 mm


https://www.guinand-uhren.de/sondermodelle/classic-edition-2023.html

[george_]

The first watches that Helmut Sinn manufactured in his “new” company in 1995 did not have the Guinand company logo, but were printed with the Chronosport logo. During this time, the 60 series was created, then referred to as a “heavy and robust chronograph with automatic winding

[george_]

[george_]

[george_]

Deepwave FAZ Edition The special model of our diving watch G44