panerai unitas

[george_]

OP I Panerai used them from 1997, base is an ETA 6497, used for the PAM000, PAM002,PAM009,PAM010,PAM055,PAM360


OP II ALso since 1997, same , base is the 6497/2, Used for the PAM005,PAM036,PAM082,PAM001,PAM003,PAM004,PAM022,PAM026,PAM056,PAM026,PAM040,PAM037,PAM061,PAM366,PAM412,PAM420,PAM413,PAM414,PAM380,


OP X Panerai used them from 2002, base is an ETA 6497, used for the PAM219,PAM112,PAM114,PAM176,PAM210,PAM231,PAM232,PAM249,PAM262,PAM116,


OP XI Panerai used them from 2002, base is an ETA 6497/2,Used for the PAM111 ,PAM113,PAM177 ,PAM183,PAM292,PAM127,PAM172,PAM217,PAM118,PAM115 ,PAM117





paneristi

[george_]

Panerai P.3000 movement


Hand-wound
Power Reserve 3 days
21 jewels
16 1/2 ligne diameter
5.3 mm thick
Two spring barrels
3 Hz Frequency Oscillation (21,600 A/h)

With the introduction of the P.3000 movement, it would seem that Panerai may no longer use the Unitas 6497 movement. In comparison, both the Unitas and the P.3000 share the same size, i.e. 16 1/2 ligne, with the P.3000 thicker at 5.3 mm compared to the Unitas at 4.5 mm. The P.3000 movement has 4 more jewels as compared to the Unitas 6497.

Based on the information given by Panerai, the P.3000 movement will be used in the Historic Range of watches together with the P.999 and P.2002 movement. Additionally, this new beautiful movement will no longer be put through C.O.S.C..


The movement will be used inside Panerai watches in the USD 7,000 to 10,000 range of watches.

HOROLOGY CRAZY

2010