Greek Watch Forum - Το ελληνικό forum ρολογιών
Αρχείο θεμάτων => Θέματα => Μήνυμα ξεκίνησε από: george_ στις Δεκέμβριος 24, 2018, 17:05:31 μμ
-
Παρα πολύ ωραιο ξεκινημα
ανυπομονω για τη συνέχεια!
Υ. Γ. : σβήσε το σχόλιο οταν γραψεις το επόμενο κεφάλαιο
Υ. Γ. 2: Μολις 4 χρόνια απο την ιδρυση της καρτιε και 13 πριν αρχισει να ασχολείται με ρολογια. Εφτιαχνε τιαρες τοτε για τους βασιλείς της εποχης, δεν είχαν βγει και τα αεροπλανακια , δεν είχε σκεφτεί την κονομα απο τα ρολογια ακομα 
Απο το ποστ του Νικολα,πρεπει να μας τα πεις σε ενα νει θεμα
-
Κατι τιαρες,ομως
Stephen Curry Wearing A Cartier Santos Skeleton Courtside
(https://i.postimg.cc/Pxb0sDK5/stephen-curry-cartier.jpg) (https://postimages.org/)
(https://i.postimg.cc/Pr737KhM/stephen-curry-cartier-watch.jpg) (https://postimages.org/)
-
(https://www.peoplemagazine.co.za/wp-content/uploads/2018/08/30fa0a7362de3eddcee36ecc70de9635.jpg)
Το καρτιεδάκι που μ'αρέσει (tank louis) πρέπει να φοράει και ο Βενσέν.
Btw, μόλις παντρεύτηκε.
Εκείνος 52, εκείνη 21.
Saluti στη Μόνικα! 8)
???
-
(https://s20.postimg.cc/axm3j3t8d/Cartier-_Drive-_Extra-_Flat-_Steel-watch-_CRWSNM0011-22.jpg) (https://postimages.org/)
(https://s20.postimg.cc/td6kgimsd/Cartier-_Drive-_Extra-_Flat-_Steel-watch-_CRWSNM0011-8.jpg) (https://postimages.org/)
Cartier
>Model: Drive Extra-Flat steel reference CRWSNM0011
>Price: $5,600 USD
>Size: 39mm wide, 6.6mm thick, 44mm lug-to-lug distance
-
Rotonde de Cartier Central Chonograph (in rose gold, above) and its movement, Caliber 9907 (below), which was designed and produced entirely in-house.
(https://s20.postimg.cc/40as5g7cd/Cartier_Central-_Chrono-movement_560.jpg) (https://postimages.org/)
πωπω μια τιαρα
-
Cartier and the Geneva Seal
Three prerequisites determine the award of the Geneva Seal:
* The movement must be mechanical and, at a minimum, assembled and adjusted in the canton of Geneva.
* Each calibre must meet twelve technical and aesthetic criteria outlined in the regulations, which have a bearing on its design and characteristics as well as the quality of the manufacture and finishes.
* The calibre must be approved and officially recognized by the Office for the Voluntary Inspection of Watches from Geneva (Bureau de Contrôle Facultatif des Montres de l’Etat de Genève). This Office is supervised by a sworn-in commission composed of members that have been appointed by the government of the canton.